CWDP-305 practice question 20 of 35
When selecting a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to distributed? Response:
Full set: 341 questionsDomain WLAN Design Troubleshooting
When changing from a centralized to a distributed data forwarding model within a centralized WLAN architecture, the data plane processing shifts from the controller to the individual access points. APs typically have less processing power and memory compared to a dedicated WLAN controller. Consequently, some advanced features that rely on the controller's resources for tasks like deep packet inspection, complex quality of service (QoS) policies, or stateful firewalling may not be supported when the AP forwards data locally. The feature set available in distributed mode is often a subset of what is available in a fully centralized forwarding model.
A. Control plane functions like RRM, key management, and load balancing remain centralized at the controller; this is a fundamental characteristic of this architecture, regardless of the data forwarding model.
B. Routers operate at the network layer (Layer 3) and forward packets based on IP addresses. They do not require special awareness of an AP's data forwarding role.
D. This describes a controller-less (distributed control) architecture, not a centralized control architecture with distributed data forwarding. The central controller still manages RRM. ---
1. CWNP. (2021). CWDP-304 Certified Wireless Design Professional Official Study Guide. Chapter 3: WLAN Architecture, Section: "Distributed Data Forwarding", pp. 98-100.
The guide explains that in a distributed data forwarding model, "the AP is responsible for more of the 802.11-to-802.3 integration... This often means that some features available in the centralized data forwarding model are not available in the distributed data forwarding model."
2. Cisco. (2023). FlexConnect Deployment Guide. Cisco Catalyst 9800 Series Wireless Controllers, IOS XE Cupertino 17.9.x. Section: "Unsupported Cisco WLC Features on FlexConnect APs".
This official vendor documentation provides a specific list of features that are not supported on FlexConnect APs (Cisco's term for distributed data forwarding). Examples include certain security features like "OEAP" and limitations on features like "Multicast-Direct." This directly confirms that not all features are supported in this mode.
3. Westcott, D. (2018). CWNA Certified Wireless Network Administrator Study Guide. 5th Edition. Sybex. Chapter 11: 802.11 Architecture, Section: "Distributed WLAN Architecture", p. 418.
While a CWNA reference, the principle is foundational and covered here. It notes that with distributed data forwarding (also called local bridging), "the data traffic is bridged by the AP from the wireless medium to the local wired network... Some features may not be available when using local bridging." This establishes the concept of feature disparity as a known architectural trade-off.
Keep practicing
Take the free CWDP-305 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWDP-305 practice questions
- Question 1Using a SCA means that all APs will be using the same channel in a given layer. How is th…
- Question 2What two 802.11 amendments deal with regulatory and transmission requirements? Response:
- Question 3What type of protection should be provided to outdoor antenna installations? Response:
- Question 4What service must be implemented on your customer's network to authenticate users against…
- Question 5Why does a frame transmitted at 1 Mbps have a greater usable range than the same frame tr…
- Question 6Prior to meeting with the customer for the first time, you should do which of the followi…
