CWDP-305 practice question 31 of 35

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure. What should you do to prevent this?

Full set: 341 questions

Domain Design Deployment and Validation

Answer options
A: Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11 Correct answer
B: Purchase and deploy new APs from a different vendor
C: Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken
D: Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result
Correct Answer:
A. Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11
Explanation

In the 2.4 GHz ISM band, there are only three 20 MHz-wide channels that do not overlap: 1, 6, and 11 (in North America). Using channels other than these in a multi-AP environment introduces significant Adjacent Channel Interference (ACI), which degrades network performance. The most effective and standard solution is to configure the WLAN infrastructure's Radio Resource Management (RRM) or Dynamic Channel Assignment (DCA) feature to restrict its automatic selection pool to only these three non-overlapping channels. This corrects the algorithm's behavior and ensures a stable, high-performing RF environment without requiring drastic changes like new hardware or a fully static plan.

Why Incorrect

B. Purchasing new APs is an unnecessary and expensive reaction to what is a common configuration setting available on virtually all enterprise-grade WLAN systems.
C. While a static plan is an option, declaring all automatic algorithms "broken" is incorrect. Modern RRM/DCA is highly effective when configured properly, which is the appropriate first step.
D. This statement is false. Using all 11 channels creates massive ACI and is a well-documented cause of poor Wi-Fi performance, not an "optimum" result.

References

1. CWNP. CWDP-304 Certified Wireless Design Professional Official Study Guide. Sybex, 2021. In Chapter 4, "WLAN RF Design," the section on "2.4 GHz Channel Planning" explicitly states, "Because of the overlapping nature of the channels in the 2.4 GHz ISM band, only three channels can be used simultaneously in the same physical area without causing interference with each other. These three nonoverlapping channels are 1, 6, and 11." (Page 113). This establishes the foundational principle for the correct answer.

2. Cisco. Radio Resource Management under Unified Wireless Networks White Paper. In the section "Dynamic Channel Assignment (DCA)," the document explains the operation of the algorithm and its configuration. It notes, "The DCA algorithm can be configured to avoid certain channels... For 802.11b/g, it is strongly recommended that you use only channels 1, 6, and 11." This directly supports reconfiguring the automatic assignment settings as the correct course of action.

3. Aruba Networks (an HPE Company). ArubaOS 8.11.0.0 User Guide. In the chapter on "Adaptive Radio Management (ARM)," the section on "Configuring ARM Features" describes how to define valid channels for both the 2.4 GHz and 5 GHz bands. The documentation guides administrators to select the specific channels ARM is allowed to use, with the best practice being the selection of non-overlapping channels (1, 6, 11) for the 2.4 GHz band to optimize performance.

Scroll to Top