CWDP-305 practice question 18 of 35
You are configuring an 802.11ac AP using manual channel planning. The design specification calls for the current AP to be placed on channel 56 in 5 GHz and to disable the 2.4 GHz radio. For what could the 2.4 GHz radio be used if not standard AP operations? Response:
Full set: 341 questionsDomain Design Deployment and Validation
When an 802.11 radio is not used for serving clients (standard AP operations), it can be repurposed for other network functions. A primary alternative use is security monitoring. In this mode, often called "monitor mode" or "sensor mode," the radio passively scans all channels in its band (2.4 GHz in this case) to detect security threats. This includes identifying rogue access points, detecting wireless intrusion attempts (WIDS/WIPS), and analyzing RF interference. This function is a critical component of a comprehensive wireless security architecture in enterprise environments.
A. PCI DSS encoding: PCI DSS is a security standard for handling payment card data; it is a set of policies and procedures, not a technical function performed by a radio.
C. Bluetooth access: The 802.11 radio hardware is distinct from Bluetooth radio hardware. While both can operate in the 2.4 GHz band and may coexist in an AP chassis, the Wi-Fi radio cannot be used to provide Bluetooth connectivity.
D. Controller-based channel assignment: The question explicitly states that the AP is being configured using manual channel planning, which is the opposite of a dynamic, controller-based channel assignment system like Radio Resource Management (RRM). ---
1. Cisco Systems, Inc., "Cisco Unified Wireless Network Protocol and Architectural-Solution-C07-732453," Cisco Design and Configuration Guide, 2015.
Page 21, Section: Access Point Modes: "The monitor mode is dedicated to monitoring the air for WIPS, rogue detection, and radio resource management (RRM) scanning. The AP does not transmit or serve clients in this mode." This document confirms that an AP radio can be dedicated to security monitoring (WIPS).
2. Aruba Networks (a Hewlett Packard Enterprise company), "ArubaOS 8.6.0.0 User Guide," Official Vendor Documentation, 2019.
Chapter: Wireless Intrusion Detection and Prevention, Section: Air Monitor: "An Air Monitor (AM) is a classification of an AP. An AM is dedicated to air monitoring, which includes intrusion detection system (IDS) services, spectrum analysis, and rogue AP detection." This source details the use of an AP as a dedicated security sensor.
3. Sikdar, B., "Contemporary Issues in Wireless Security," Lecture Notes, ECSE-6660: Internetworking of Things, Rensselaer Polytechnic Institute (RPI), Fall 2019.
Slide 21, "Wireless Intrusion Detection Systems (WIDS)": Discusses the use of sensors for monitoring the wireless medium. It states, "Sensors can be dedicated devices or APs operating in 'monitor' mode." This university courseware validates the concept of using APs in a dedicated monitoring role for security.
Keep practicing
Take the free CWDP-305 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWDP-305 practice questions
- Question 1Using a SCA means that all APs will be using the same channel in a given layer. How is th…
- Question 2What two 802.11 amendments deal with regulatory and transmission requirements? Response:
- Question 3What type of protection should be provided to outdoor antenna installations? Response:
- Question 4What service must be implemented on your customer's network to authenticate users against…
- Question 5Why does a frame transmitted at 1 Mbps have a greater usable range than the same frame tr…
- Question 6Prior to meeting with the customer for the first time, you should do which of the followi…
