CWNA-109 practice question 10 of 25
ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (autonomous) 802.11 bridge units. 802.1X/EAP will be used for bridge authentication. A Linux-based RADIUS server will be used for authentication. What device in the bridge implementation acts as the 802.1X Authenticator?
Full set: 122 questionsIn an 802.1X framework, there are three key components: the Supplicant (the client device requesting access), the Authenticator (the network access device), and the Authentication Server (which validates credentials). In a point-to-multipoint wireless bridge deployment, the root bridge functions as the central access point for the wireless link. The non-root bridges act as clients (Supplicants) that must authenticate to connect to the network via the root bridge. Therefore, the root bridge serves as the 802.1X Authenticator, controlling network access and relaying authentication messages between the non-root bridges and the RADIUS (Authentication) server.
A. The Ethernet switch: The switch operates on the wired side of the network. The 802.1X authentication in this scenario is occurring over the wireless bridge link, which is controlled by the root bridge.
B. The RADIUS server: The RADIUS server is the Authentication Server. It makes the final decision on whether to grant or deny access but does not function as the Authenticator that controls the port.
C. All non-root bridges: The non-root bridges are the client devices requesting network access. In the 802.1X framework, this makes them the Supplicants, not the Authenticators. ---
1. CWNP, LLC., CWNA Certified Wireless Network Administrator Study Guide: Exam CWNA-109, 6th Edition, Wiley, 2023.
Chapter 10: WLAN Security, Page 394, "802.1X/EAP Framework": This section defines the Authenticator as the device that blocks or allows traffic from the supplicant, typically an access point or WLAN controller. In a bridge topology, the root bridge performs this access point-like function for the non-root bridges.
2. Cisco, Cisco Aironet 1550 Series Outdoor Access Point Software Configuration Guide, Release 8.1, Cisco Systems, Inc., 2015.
Chapter 11: "Configuring Authentication Types", Section: "Configuring WPA, WPA2, and WEP": The documentation for configuring autonomous bridges states, "When you configure the access point/bridge as a root bridge, you can configure it as an authenticator for non-root bridges." This explicitly identifies the root bridge as the Authenticator.
3. IEEE Standards Association, IEEE Standard for Local and Metropolitan Area Networks--Port-Based Network Access Control, IEEE Std 802.1X-2010.
Section 5.1, "Architectural overview": The standard defines the Authenticator as the entity that "facilitates the authentication of other entities attached to the same LAN." In the described wireless bridge network, the root bridge is the entity to which all non-root bridges attach, fulfilling the role of the Authenticator.
Keep practicing
Take the free CWNA-109 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWNA-109 practice questions
- Question 1You manage a WLAN with 100 802.11ac access points. All access points are configured to us…
- Question 2You have implemented an 802.11ax WLAN for a customer. All APs are four stream HE APs. The…
- Question 3You are the network administrator for ABC Company. Your manager has recently attended a w…
- Question 4The BSA of an AP covers the area used by the sales and marketing department. Thirty-five …
- Question 5What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 mi…
- Question 6You are troubleshooting a problem with interference from a non-802.11 device. Given that …
