CWNA-109 practice question 8 of 25

In a long-distance RF link, what statement about Fade Margin is true?

Full set: 122 questions
Answer options
A: A Fade Margin is unnecessary on a long-distance RF link if more than 80% of the first Fresnel zone is clear of obstructions.
B: The Fade Margin is a measurement of signal loss through free space and is a function of frequency and distance.
C: Fade Margin is an additional pad of signal strength designed into the RF system to compensate for unpredictable signal fading. Correct answer
D: The Fade Margin of a long-distance radio link should be equivalent to the receiver’s low noise filter gain.
Correct Answer:
C. Fade Margin is an additional pad of signal strength designed into the RF system to compensate for unpredictable signal fading.
Explanation

Fade Margin is a critical design parameter in RF link budget calculations, especially for long-distance links. It represents an intentional surplus of signal power, engineered into the system, above the minimum required for the receiver's sensitivity threshold. This "pad" or "buffer" is not for overcoming predictable, constant losses like Free Space Path Loss (FSPL), but rather to ensure link reliability by compensating for unpredictable, temporary signal degradation (fading). Fading can be caused by atmospheric conditions like rain, multipath propagation, or other environmental factors. A higher Fade Margin increases the probability that the link will remain operational during these adverse conditions.

Why Incorrect

A. Fresnel zone clearance addresses predictable diffraction losses, while Fade Margin addresses unpredictable, temporary fading. A link requires both for reliability.
B. This statement defines Free Space Path Loss (FSPL), which is the predictable signal attenuation over distance, not the additional margin for fading.
D. Fade Margin is a system-level link budget value, not directly equivalent to the gain of a specific component like a low noise amplifier or filter.

References

1. Vendor Documentation:

Cisco, "Outdoor Bridge Range Calculation Utility," Technical Note. In the section "Link Budget Details," Fade Margin is described as a value added to the link budget to account for environmental factors and ensure a more robust link. It is explicitly defined as a buffer against signal fading. (Available in various Cisco technical documents on outdoor wireless design).

2. University Courseware:

Virginia Tech, ECE 4634: "Introduction to Communication Systems," Lecture notes on Link Budgets. The course materials define Fade Margin as an allowance for signal degradation due to various effects like multipath fading and rain attenuation, ensuring the received power stays above the required threshold. (Typically found in Chapter 9 or sections covering link analysis).

3. Academic Publication:

Rappaport, T. S. (2002). Wireless Communications: Principles and Practice (2nd ed.). Prentice Hall. In Chapter 4, "Mobile Radio Propagation: Large-Scale Path Loss," the concept of a link budget is detailed, explaining that a fade margin is added to account for statistical variations in signal strength, ensuring a certain level of reliability (e.g., 99.9%). (See Section 4.10, "Link Budget Design Using Path Loss Models").

Scroll to Top