CWNA-109 practice question 13 of 25
In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping?
Full set: 122 questionsIn the 2.4 GHz band, 802.11 channels are 22 MHz wide, but their center frequencies are spaced only 5 MHz apart. For two channels to be considered non-overlapping, their frequency ranges must not coincide. This requires their center frequencies to be separated by at least 22 MHz. Given the 5 MHz spacing between channel numbers, this translates to a minimum separation of 5 channel numbers (e.g., channel 1 and channel 6). Applying this rule, the channel pair 2 and 8 has a separation of 6 channels (8 - 2 = 6), which is greater than the required minimum of 5. Therefore, channels 2 and 8 are non-overlapping.
A. 7 and 11: The separation is 4 channels (11 - 7 = 4), which is less than the required 5, resulting in spectral overlap.
C. 1 and 5: The separation is 4 channels (5 - 1 = 4), which is less than the required 5, resulting in spectral overlap.
D. 4 and 6: The separation is 2 channels (6 - 4 = 2), which is less than the required 5, resulting in significant spectral overlap.
1. IEEE Std 802.11™-2020, "IEEE Standard for Information Technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications."
Section 27.3.13.2, Table 27-20—Channel center frequencies for 2.4 GHz band: This table defines the center frequency for each channel as 2407 + 5k MHz for k = [1, 14].
Section 18.3.2.3, Transmit spectrum mask: This section defines the spectral mask for DSSS PHYs, which effectively creates a 22 MHz channel width. The combination of these sections dictates that a separation of 5 channel numbers is needed to prevent overlap.
2. Kurose, J. F., & Ross, K. W. (2017). Computer Networking: A Top-Down Approach (7th ed.). Pearson.
Chapter 7, Section 7.3.3, "IEEE 802.11 Wireless LAN": The text explains the 2.4 GHz channel allocation, stating, "There is a 5 MHz frequency gap between the channels. Because the 802.11b channel bandwidth is 22 MHz, this means that the signals in adjacent channels... will interfere with each other. In fact, for two channels to be non-interfering, their center frequencies must be separated by at least 25 MHz." This supports the requirement for a 5-channel separation (e.g., 1, 6, 11).
3. Cisco, "Radio Resource Management under Unified Wireless Networks," White Paper, 2019.
Section: "Dynamic Channel Assignment (DCA)": This document explains, "In the 2.4-GHz band, there are only three non-overlapping channels: 1, 6, and 11... Any other channel selection results in overlap with the primary channels." This industry best practice is derived directly from the 22 MHz channel width and 5 MHz spacing defined in the 802.11 standard. The principle applies to any channel pair, not just the commonly used 1, 6, and 11.
Keep practicing
Take the free CWNA-109 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWNA-109 practice questions
- Question 1You manage a WLAN with 100 802.11ac access points. All access points are configured to us…
- Question 2You have implemented an 802.11ax WLAN for a customer. All APs are four stream HE APs. The…
- Question 3You are the network administrator for ABC Company. Your manager has recently attended a w…
- Question 4The BSA of an AP covers the area used by the sales and marketing department. Thirty-five …
- Question 5What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 mi…
- Question 6You are troubleshooting a problem with interference from a non-802.11 device. Given that …
