CWNA-109 practice question 20 of 25

You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is experiencing surprisingly low data rates during the work day…

Full set: 122 questions
You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is experiencing surprisingly low data rates during the work day. You analyze the workspace outside of business hours and detect a strong signal with a typical noise floor at the client location. During working hours, the user works with a laptop in the area and uses an external USB hard drive for continuous data access. The user also states that the laptop works as expected on her home network. The user working approximately 8 feet away from this client experiences no problems. Based on this information, what is the likely cause of the problem?
Answer options
A: The AP is overloaded during the work day
B: The drivers in the laptop are corrupt
C: The laptop has a failing wireless adapter
D: The external hard drive is USB 3.0 and is causing a significant increase in the noise floor when in use Correct answer
Correct Answer:
D. The external hard drive is USB 3.0 and is causing a significant increase in the noise floor when in use
Explanation

The scenario describes a highly localized interference problem affecting only the 2.4 GHz band and occurring only when the user is actively working. USB 3.0 devices and cables are a well-documented source of radio frequency interference (RFI) in the 2.4–2.5 GHz spectrum. When the user accesses the external hard drive, the active USB 3.0 connection radiates broadband noise. This noise significantly raises the noise floor in the immediate vicinity of the laptop's Wi-Fi antenna, which degrades the Signal-to-Noise Ratio (SNR). A poor SNR forces the client to use lower, more robust data rates, resulting in the observed slow performance. The issue is resolved after hours because the source of interference is inactive.

Why Incorrect

An overloaded AP would likely impact multiple users in the area, not just one, contradicting that a nearby user has no problems. Corrupt drivers would typically cause persistent issues regardless of the network, but the user's laptop works correctly at home. A failing wireless adapter would also likely cause performance problems on all networks, not just the one at work.

References

1. Intel Corporation. (2012, April). USB 3.0 Radio Frequency Interference on 2.4 GHz Devices. White Paper, Document Number: 327216-001. In Section 2.1, "Noise Spectrum," it states, "The noise from USB 3.0 data spectrum can be high (in the 2.4–2.5 GHz range)... If the antenna of a wireless device operating in this band is placed close to any of the USB 3.0 radiation channels, it can pick up the broadband noise... [which] can affect the SNR and limit the sensitivity of any wireless receiver."

2. Coleman, D. D., & Westcott, D. A. (2023). CWNA Certified Wireless Network Administrator Study Guide (6th ed., CWNA-109). Wiley. Chapter 10, "WLAN Troubleshooting," discusses Layer 1 problems, including non-Wi-Fi interference that raises the noise floor and degrades SNR, which is the fundamental cause of the problem described. The principles of identifying and isolating localized, non-802.11 interference sources are central to this chapter.

Scroll to Top