HQT-4420 practice question 9 of 10
Which combination of trays allows a HCP S31 to be configured to its maximum capacity?
Full set: 35 questionsAn HCP S31 node is architected with a single 4U100 server chassis, which functions as the primary controller. To scale capacity, this controller node connects to high-density 4U106 storage expansion trays. The maximum supported configuration for a single HCP S31 node is one 4U100 server connected to eight 4U106 storage trays. This 1+8 configuration provides the highest raw storage capacity available for this specific model, leveraging the full expansion capabilities of the S31 controller.
A. An HCP S31 node consists of only one 4U100 controller, not two. The 4U106 is the expansion tray, not the primary server.
C. This is a valid configuration, but it does not represent the maximum capacity, as an S31 node can support up to eight expansion trays.
D. This is the minimum expanded configuration, not the maximum. It represents a valid setup but with the lowest possible expansion capacity.
1. Hitachi Vantara, Hitachi Content Platform S-Series Node Hardware Reference, MK-92HCP035-12, May 2021.
Page 14, Section: "HCP S31 node": "An S31 node consists of one S31 server and from one to eight S31 storage trays." This section explicitly states the 1+8 maximum configuration.
Page 15, Table 2 "HCP S31 node specifications": This table details the components, identifying the "Server" as the 4U100 model and the "Storage tray" as the 4U106 model.
2. Hitachi Vantara, Hitachi Content Platform (HCP) S Series Datasheet, DS-573-D, March 2021.
Page 2, Table "HCP S Series Specifications", Row "Max Expansion Trays per Node": For the S31 model, this row specifies a value of "8", confirming the maximum number of expansion units. The table also identifies the S31 server as a 4U, 100-drive chassis and the expansion tray as a 4U, 106-drive chassis.
Keep practicing
Take the free HQT-4420 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other HQT-4420 practice questions
- Question 1How is the software update package uploaded to an HCP S10?
- Question 2You are installing an HCP G10 with attached storage. A VSP G1000 is used to provision the…
- Question 3What does the HCP Data Protection Level setting identify?
- Question 4Which statement regarding the Data At Rest Encryption feature (DARE) is correct?
- Question 5You are installing an HCP G10 and are now setting the front-end connectivity. The custome…
- Question 6How should the RAID group(s) and logical volume(s) be configured on an HCP G10 node with …
