HQT-4420 practice question 7 of 10
You are installing a HCP G10 with attached storage. The system will be networked using four 10 GbE SFP+ interfaces. How many PCIe cards are installed in each HCP G10 node?
Full set: 35 questionsThe Hitachi Content Platform (HCP) G10 node is configured with specific PCIe adapter cards to meet networking requirements. To provide four 10 GbE SFP+ interfaces, two dual-port 10 GbE SFP+ network adapter cards are installed in the available PCIe slots. Each card provides two SFP+ ports, so two cards are required to achieve the total of four specified interfaces. This is a standard hardware configuration for the HCP G10 platform when SFP+ connectivity is required.
A. 1: A single dual-port 10 GbE SFP+ card would only provide two interfaces, not the required four.
C. 3: Installing three dual-port cards would result in six interfaces, which exceeds the specified requirement.
D. 4: Installing four dual-port cards would result in eight interfaces, which also exceeds the specified requirement.
1. Hitachi Vantara Documentation: Hitachi Content Platform G10 and G11 Hardware Installation and Service Guide (MK-92HCP047-11), Chapter 2: HCP G10 node components, Section: "PCIe card slot descriptions", Page 2-10. The table in this section lists the "Dual-port 10GbE SFP+ network adapter" as a supported option, confirming that two such cards are needed to provide four ports.
Keep practicing
Take the free HQT-4420 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other HQT-4420 practice questions
- Question 1How is the software update package uploaded to an HCP S10?
- Question 2You are installing an HCP G10 with attached storage. A VSP G1000 is used to provision the…
- Question 3What does the HCP Data Protection Level setting identify?
- Question 4Which statement regarding the Data At Rest Encryption feature (DARE) is correct?
- Question 5You are installing an HCP G10 and are now setting the front-end connectivity. The custome…
- Question 6How should the RAID group(s) and logical volume(s) be configured on an HCP G10 node with …
