LEED-AP-IDC practice question 32 of 35
A design team is working on the hotel interior project in a hot and dry location. A heating, ventilating and air conditioning (HVAC) system is within the project scope. Which of the following strategies will contribute to minimization of ozone depleting potential and global warming potential for the project?
Full set: 100 questionsLEED v4 ID+C EA Credit “Enhanced Refrigerant Management” rewards projects that (1) avoid refrigerants altogether or (2) select equipment with very low combined ozone-depleting potential (ODP) and global-warming potential (GWP). Evaporative cooling provides conditioned air by water evaporation and therefore uses no mechanical refrigeration cycle or refrigerants, eliminating both ODP and refrigerant-related GWP at the source. In a hot, dry climate, evaporative cooling is also climatically well-suited, further reducing reliance on conventional vapor-compression HVAC equipment.
A. Carbon offsets address indirect CO₂ emissions from energy use; they do nothing to reduce on-site refrigerant ODP/GWP required by the credit.
B. Operable windows lower cooling loads but do not eliminate or alter the refrigerants in the HVAC system; ODP/GWP remain unchanged.
D. Multiple small packaged units increase total refrigerant charge and leakage points; typical R-410A has zero ODP but high GWP, so this strategy does not minimize combined impact.
1. USGBC. LEED v4 ID+C Reference Guide, Energy & Atmosphere, “Enhanced Refrigerant Management,” Section EAc3, p. 368-370: definition of strategies; Option 1 “No Refrigerants” lists evaporative cooling as compliant.
2. ASHRAE Handbook—HVAC Systems and Equipment, 2016, Ch. 57 “Evaporative Air-Cooling Equipment,” p. 57.1-57.3: states systems use no CFC-, HCFC-, or HFC-based refrigerants.
3. US EPA, “Substitutes in Residential and Light Commercial Air Conditioning,” SNAP Program Fact Sheet, 2015, p. 2: notes R-410A zero ODP but 2088 GWP, emphasizing need for alternate technologies.
Keep practicing
Take the free LEED-AP-IDC practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other LEED-AP-IDC practice questions
- Question 1A mechanical engineer needs to identify spaces that are considered densely occupied accor…
- Question 2A renovation project includes both a new kitchen sink and shower and an existing lavatory…
- Question 3A project team wants to achieve Materials and Resources Credit, Building Product Disclosu…
- Question 4To satisfy the Increased Ventilation strategy in the Indoor Environmental Quality Credit,…
- Question 5A tenant implements the following strategies to reduce the amount of water used. Which st…
- Question 7What should a team focus on first to significantly improve energy performance or achieve …
