LEED-AP-IDC practice question 13 of 35
In the pre-design phase, a plumbing engineer identified that the low-flow fixtures which met the Owner's requirements could achieve total reductions in indoor water usage of 39%. Which strategies should be assessed to meet the Owner's Project Requirements goals of 45% reduction?
Full set: 100 questionsLEED v4 ID+C counts every gallon of potable water—municipal or well—used inside the project. When high-efficiency plumbing fixtures alone reach only 39 % savings, the reference guide recommends targeting process‐water equipment such as dishwashers, commercial kitchen appliances and laundry machines. Specifying ENERGY STAR/CEE Tier 3 models or revising operating schedules lowers indoor potable demand and can bridge the gap to the Owner’s 45 % target. Outdoor irrigation changes or simply switching water sources do not influence the Indoor Water Use Reduction calculation, and limiting occupant access violates LEED assumptions for fixture use.
A. Potable well water is still potable; LEED counts it identically, so no reduction is achieved.
B. Irrigation affects the Outdoor Water Use Reduction credit, not the indoor water calculation targeted here.
C. Occupant fixture counts and frequency are fixed by LEED; restricting access compromises health and fails to change the baseline calculation.
1. USGBC, LEED v4 Reference Guide for Interior Design and Construction, WE Credit: Indoor Water Use Reduction – “Further Explanation: Process Water Equipment,” pp. 196-198.
2. USGBC, LEED v4 Reference Guide, Glossary – “Potable Water,” p. 921 (municipal and well sources both potable).
3. USGBC, LEED v4 Reference Guide, WE Credit: Outdoor Water Use Reduction, p. 186 (irrigation excluded from indoor calculations).
4. U.S. EPA & DOE ENERGY STAR. “Water Use in Commercial Buildings,” 2014, Section 3.2 (ENERGY STAR appliances reduce indoor potable demand).
5. Massachusetts Institute of Technology (MIT) OCW – 1.784 “Indoor Water Efficiency Strategies,” Lecture notes, Slide 12 (process‐water appliance upgrades as a key strategy for >40 % savings).
Keep practicing
Take the free LEED-AP-IDC practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other LEED-AP-IDC practice questions
- Question 1A mechanical engineer needs to identify spaces that are considered densely occupied accor…
- Question 2A renovation project includes both a new kitchen sink and shower and an existing lavatory…
- Question 3A project team wants to achieve Materials and Resources Credit, Building Product Disclosu…
- Question 4To satisfy the Increased Ventilation strategy in the Indoor Environmental Quality Credit,…
- Question 5A tenant implements the following strategies to reduce the amount of water used. Which st…
- Question 7What should a team focus on first to significantly improve energy performance or achieve …
