LEED-AP-IDC practice question 19 of 35

Which of the following prerequisites or credits is affected by using plug-in devices when attempting to achieve Indoor Environmental Quality Credit, Thermal Comfort?

Full set: 100 questions
Answer options
A: Energy and Atmosphere Credit, Demand Response
B: Energy and Atmosphere Credit, Advanced Energy Metering Correct answer
C: Energy and Atmosphere Prerequisite, Minimum Energy Performance
D: Energy and Atmosphere Prerequisite, Building Level Energy Metering
Correct Answer:
B. Energy and Atmosphere Credit, Advanced Energy Metering
Explanation

For LEED v4 ID+C, EQ Credit-Thermal Comfort allows occupants to use personal thermal-comfort devices (desk fans, radiant panels, etc.). Because these devices are receptacle (plug) loads, their electricity use must be included when pursuing EA Credit-Advanced Energy Metering, which requires permanent meters for every end use that represents ≥10 % of the tenant’s total annual energy consumption—explicitly listing plug/receptacle loads. Choosing this strategy therefore directly affects compliance with Advanced Energy Metering; none of the other listed prerequisites/credits require separate treatment of individual plug-in comfort devices.

Why Incorrect

A. Demand Response measures peak-load shedding capability; simply adding fans or heaters neither hinders nor mandates DR participation or controls.
C. Minimum Energy Performance models regulated systems; plug/receptacle loads are unregulated and do not alter prerequisite compliance thresholds.
D. Building-Level Energy Metering only needs one meter per energy source; additional plug devices do not change that basic requirement.

References

1. USGBC. LEED v4 for Interior Design and Construction Reference Guide, EA Credit: Advanced Energy Metering, “Interiors—Requirements,” p. 259-260: “Install advanced meters for all end uses (lighting, HVAC, plug/receptacle loads) representing 10 % or more of annual consumption.”

2. USGBC. LEED v4 ID+C Reference Guide, EQ Credit: Thermal Comfort, “Further Explanation—Personal Comfort Devices,” p. 450: identifies small plug-in devices as acceptable strategies.

3. ASHRAE Standard 55-2017, Appendix D, §D2.2: recognizes personal comfort systems (low-energy fans, radiant panels) as meeting local thermal comfort with low power (<40 W).

4. MIT OpenCourseWare. “Building Energy Efficiency,” Lecture 11, slide 6 (2019): notes plug-load metering thresholds in LEED v4 Advanced Energy Metering credit.

Scroll to Top