300-110 practice question 4 of 10
A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?
Full set: 94 questionsIn a Cisco wireless guest anchor deployment, mobility anchors are used to tunnel guest traffic securely to a DMZ. When configuring multiple anchor Wireless LAN Controllers (WLCs) for redundancy and load balancing, administrators can assign a priority value to each anchor to dictate the selection order. The priority levels range from 1 to 3, where a priority of 1 designates the primary anchor (highest priority), 2 designates the secondary, and 3 designates the tertiary. To ensure that Anchor1 is always selected first as the primary termination point for the guest SSID tunnels, it must be configured with a priority level of 1. The foreign controller will always attempt to build the tunnel to the highest-priority anchor first.
A. 0: This is an invalid priority value; Cisco mobility anchor priorities strictly range from 1 to 3.
C. 2: This designates a secondary priority, meaning Anchor1 would only be used if the primary anchor (priority 1) fails.
D. 3: This designates a tertiary priority, which is the lowest priority level in the anchor selection process.
1. Cisco AireOS Wireless LAN Controller Configuration Guide, Release 8.10 (Section: Configuring Mobility Anchors).
2. Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE (Section: Guest Wireless LAN).
Keep practicing
Take the free 300-110 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-110 practice questions
- Question 1A customer is planning to replace older access points with Cisco 4800 Series Access Point…
- Question 2A network engineer must review the design for a Cisco wireless deployment at a hospital. …
- Question 3An engineer is estimating the loss between two floors of an office building. Using Ekahau…
- Question 5An engineer is designing a wireless network in a historic building that has large rooms a…
- Question 6A community bank has three campus locations and one HQ with the data center. Each campus …
- Question 7A university has three campus locations and the main data center. Each campus location ha…
