300-110 practice question 1 of 10
A customer is planning to replace older access points with Cisco 4800 Series Access Points. Unaware of the infrastructure requirements, the client has an engineer investigate the inline power requirement. Which IEEE 802.3 standard complies with the Cisco 4800 Series Access Points?
Full set: 94 questionsThe Cisco Aironet 4800 Series Access Points are high-performance devices equipped with four radios, designed to support advanced features such as hyperlocation, intelligent capture, and high-density client environments. To operate with full functionality and power all internal components without degradation, these access points require the IEEE 802.3at (PoE+) standard or Cisco UPOE. The IEEE 802.3at standard provides up to 30 watts of power per switch port, which adequately meets the 31.5W peak power draw requirement when combined with LLDP power negotiation or Cisco UPOE capabilities. Consequently, when an engineer investigates the inline power requirements for replacing older APs with the 4800 Series, ensuring the switching infrastructure complies with the 802.3at standard is essential for optimal wireless performance.
A. While 802.3bt (PoE++) provides up to 90W and can power the AP, the 4800 Series is specifically documented to require 802.3at (PoE+) or Cisco UPOE for full functionality.
B. IEEE 802.3af provides a maximum of 15.4W per port, which is insufficient to power the multiple radios and advanced features of the Cisco 4800 Series Access Points.
C. IEEE 802.3ac is a networking standard that defines frame extensions for Virtual LAN (VLAN) tagging, not an inline power or Power over Ethernet (PoE) standard.
- Cisco Aironet 4800 Series Access Points Data Sheet. Section: "Product specifications", Table 1: "Powering options".
- Cisco Wireless Controller Configuration Guide, Release 8.10. Chapter: "Power over Ethernet".
Keep practicing
Take the free 300-110 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-110 practice questions
- Question 2A network engineer must review the design for a Cisco wireless deployment at a hospital. …
- Question 3An engineer is estimating the loss between two floors of an office building. Using Ekahau…
- Question 4A customer designs a Cisco wireless environment to provide connectivity to employees and …
- Question 5An engineer is designing a wireless network in a historic building that has large rooms a…
- Question 6A community bank has three campus locations and one HQ with the data center. Each campus …
- Question 7A university has three campus locations and the main data center. Each campus location ha…
