300-110 practice question 5 of 10

An engineer is designing a wireless network in a historic building that has large rooms and ornate wall coverings. Which approach must be considered first when placing access points?

Full set: 94 questions
Answer options
A: aesthetics Correct answer
B: RF coverage
C: cell overlap
D: RF interference
Correct Answer:
A. aesthetics
Explanation

When designing a wireless network in a historic building with ornate wall coverings, aesthetics must be the primary consideration for access point placement. Historic preservation rules, local regulations, and building management typically impose strict visual constraints to maintain the architectural and historical integrity of the facility. Consequently, engineers must first determine where access points can be legally and visually concealed, painted, or blended into the environment. Only after these strict physical and aesthetic placement restrictions are established can the engineer proceed to calculate RF coverage, cell overlap, and interference mitigation strategies around those restricted mounting locations to ensure adequate network performance.

Why Incorrect

B. RF coverage is the technical objective, but aesthetic constraints dictate the permissible locations for AP placement first in historic buildings.
C. Cell overlap is a secondary design metric calculated only after the physical placement constraints are established.
D. RF interference is an operational consideration, but it does not supersede the strict physical and visual restrictions of a historic building.

References

1. Cisco Systems, Inc. "Enterprise Mobility 8.5 Design Guide." Chapter: WLAN RF Design Considerations (Aesthetics and Physical Constraints).

2. Cisco Systems, Inc. "Cisco Wireless Site Survey Guidelines." Section: Facility and Architectural Constraints.

Scroll to Top