CTS practice question 12 of 35
[Designing AV Systems]In order to mount a projector so that it is horizontally centered with the suspended screen, the technician should look at…
Full set: 254 questions[Designing AV Systems]
In order to mount a projector so that it is horizontally centered with the suspended screen, the technician should look at which drawings in the plans?
A Reflected Ceiling Plan (RCP) is a type of architectural drawing that shows a view of the ceiling as if it were reflected onto the floor below. This plan is essential for coordinating the layout of all items located on the ceiling, such as light fixtures, HVAC vents, speakers, and projectors. To horizontally center a projector with a screen, the technician must consult the RCP to see the projector's specified location relative to the screen and other ceiling elements.
A. Detail drawings show specific mounting or connection methods for a single component, not its overall placement within the room.
B. Sections are cut-through views of a building, useful for understanding vertical relationships between floors and structural elements, not horizontal placement on a ceiling.
C. Elevations are side views of walls and would be used to determine the vertical mounting height of the screen, not the horizontal position of the projector.
1. AVIXA International. (2017). AV Design and Coordination Process (A102.01:2017). Section 3.4.3, "Reflected Ceiling Plan." (Defines the RCP and its use for locating ceiling-mounted AV equipment).
2. AVIXA. (2020). CTS-D Certified Technology Specialist—Design Exam Guide, Third Edition. McGraw-Hill. Chapter 3, "Communicating Design Intent," Section "Architectural Drawings," pp. 80-82. (Explains the function of different drawing types, including the RCP for ceiling device placement).
Keep practicing
Take the free CTS practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CTS practice questions
- Question 1[Developing AV Solutions]Which method of control is supported by HDBaseT?
- Question 2[Conducting a Needs Assessment] During a site survey, a client states that there will be …
- Question 3[Developing AV Solutions] According to AVIXA Standards, what is the MINIMUM load rating f…
- Question 4[Developing AV Solutions] What key specification of an owner furnished credenza will a te…
- Question 7[Developing AV Solutions] In an audiovisual system where a touch panel is to be connected…
- Question 8[Developing AV Solutions]After there is an approved labor change to a project, what shoul…
