CWDP-305 practice question 23 of 35

A customer is acquiring a new VoWLAN system to replace their existing wired phone system. When reading about his system's requirements, you learned that is requires 25 db of SNR to work as expected. After surveying the environment, you discovered that the noise floor is -88 dBm. What should be the minimum RSSI value to meet the system's requirements?

Full set: 341 questions

Domain WLAN Design and Site Surveying

Answer options
A: -70 dBm
B: -67 dBm
C: -65 dBm
D: -63 dBm Correct answer
Correct Answer:
D. -63 dBm
Explanation

The Signal-to-Noise Ratio (SNR) is the difference between the received signal strength (RSSI) and the ambient noise floor. The formula is: SNR (dB) = RSSI (dBm) - Noise Floor (dBm). To find the minimum required RSSI to meet the system's requirement, the formula can be rearranged to: RSSI (dBm) = Required SNR (dB) + Noise Floor (dBm). Given: Required SNR = 25 dB Noise Floor = -88 dBm Calculation: RSSI = 25 + (-88 dBm) = -63 dBm. Therefore, a minimum RSSI of -63 dBm is required to achieve the necessary 25 dB SNR.

Why Incorrect

A. -70 dBm: This RSSI would provide an SNR of only 18 dB (-70 dBm - (-88 dBm)), which is insufficient.
B. -67 dBm: This RSSI would provide an SNR of only 21 dB (-67 dBm - (-88 dBm)), failing to meet the requirement.
C. -65 dBm: This RSSI would provide an SNR of only 23 dB (-65 dBm - (-88 dBm)), which is below the 25 dB minimum. ---

References

1. CWNP, LLC. (2021). CWDP-304 Certified Wireless Design Professional Official Study Guide. Chapter 3: RF Design, section "RF Metrics." This foundational text for the CWDP certification path explains that SNR is calculated as the signal level in dBm minus the noise level in dBm. The principles are directly applicable to the CWDP-305 exam.

2. Cisco Systems, Inc. (2019). Enterprise Mobility 8.5 Design Guide. Chapter: "Voice over WLAN Design Recommendations," section "RF Design for Voice." This guide explicitly states, "A signal-to-noise ratio (SNR) of 25 dB or greater is recommended for voice networks," and defines SNR as the difference between the signal strength and the noise floor.

3. Geier, J. (2015). Designing and Deploying 802.11 Wireless Networks: A Practical Guide to Implementing 802.11n and 802.11ac Wireless Networks for Enterprise-Based Applications (2nd ed.). Cisco Press. Chapter 4: "Performing a Wireless Site Survey," section "Analyzing the Results." This reference details the process of analyzing RF metrics, including the calculation of SNR from measured RSSI and noise floor values, reinforcing the formula used.

Scroll to Top