CWDP-305 practice question 22 of 35
When installing APs on high ceilings, what should be the most common PPE to be used?
Full set: 341 questionsDomain Design Deployment and Validation
Installing Access Points (APs) on high ceilings is classified as working at height, often in a construction or industrial environment. The most significant hazards are falls from height and being struck by falling objects. Therefore, the most common and critical Personal Protective Equipment (PPE) includes a hardhat for head protection, a body belt (or more modernly, a full-body harness) as part of a personal fall arrest system, and a high-visibility vest to ensure the worker is easily seen by equipment operators and other personnel on site. This combination directly mitigates the primary risks associated with the task.
B. This set is too generic. While safety glasses and gloves are often used, this option critically omits the required PPE for head and fall protection when working at height.
C. Clean suits and masks are specialized PPE for contamination-controlled environments, such as cleanrooms or certain healthcare facilities, not for general installation work.
D. Similar to option C, this PPE is for clean environments and lacks the essential head protection and fall arrest equipment required for safely working on high ceilings. ---
1. Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. 29 CFR 1926.100 - Head Protection. This standard mandates the use of protective helmets (hardhats) for employees working in areas where there is a potential for head injury from impact or falling objects.
2. Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. 29 CFR 1926.501(b)(1) - Duty to have fall protection. This regulation requires that employees on a working surface 6 feet or more above a lower level must be protected by a personal fall arrest system, of which a body harness is a key component.
3. American National Standards Institute (ANSI)/American Society of Safety Professionals (ASSP). ANSI/ASSP A10.48-2016, Criteria for Safety Practices with the Construction, Demolition, Modification and Maintenance of Communication Structures. This standard, while focused on large towers, establishes industry best practices for working at height with communications equipment, including the use of fall protection, head protection, and high-visibility apparel.
4. University of Washington, Environmental Health & Safety. Fall Protection Work Plan. Section 5, "Methods of Fall Protection," outlines the required equipment, including full-body harnesses, and Section 6, "Other Required Personal Protective Equipment," specifies hard hats and high-visibility clothing as necessary based on site-specific hazard assessments common to this type of work.
Keep practicing
Take the free CWDP-305 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other CWDP-305 practice questions
- Question 1Using a SCA means that all APs will be using the same channel in a given layer. How is th…
- Question 2What two 802.11 amendments deal with regulatory and transmission requirements? Response:
- Question 3What type of protection should be provided to outdoor antenna installations? Response:
- Question 4What service must be implemented on your customer's network to authenticate users against…
- Question 5Why does a frame transmitted at 1 Mbps have a greater usable range than the same frame tr…
- Question 6Prior to meeting with the customer for the first time, you should do which of the followi…
