CWDP-305 practice question 35 of 35

Why should band steering algorithms allow stations to connect to the 2.4 GHz band after ignoring a certain number of Probe Requests?

Full set: 341 questions

Domain WLAN Design Troubleshooting

Answer options
A: Because the FCC requires it
B: Because some clients are persistent clients that will not move to the 5 GHz band Correct answer
C: Because the 802.11 standard requires it
D: Because the AP will experience a buffer overflow if they do not eventually respond with a Probe Response
Correct Answer:
B. Because some clients are persistent clients that will not move to the 5 GHz band
Explanation

Band steering is a proprietary feature designed to encourage dual-band capable clients to connect to the less congested 5 GHz band. The mechanism often involves the Access Point (AP) ignoring or delaying Probe Responses to a client's initial probes on the 2.4 GHz band. However, client device drivers and their roaming logic are not standardized. Some clients, often referred to as "sticky" or "persistent," may not be programmed to attempt a 5 GHz connection after failing on 2.4 GHz. To avoid denying network service to these clients, the band steering algorithm incorporates a fallback mechanism. After a predefined number of ignored probes or a timeout period, the AP will respond on the 2.4 GHz band, ensuring eventual connectivity for all client types.

Why Incorrect

A. The FCC (Federal Communications Commission) regulates radio frequency spectrum usage, power levels, and emissions, not Layer 2 client connection logic or proprietary algorithms like band steering.
C. Band steering is a vendor-specific, proprietary feature. The IEEE 802.11 standard defines the probe/response mechanism but does not mandate any logic for preferring one band over another.
D. An AP is engineered to process a high volume of management frames. Simply ignoring a few Probe Requests from a single client does not consume significant resources or lead to a buffer overflow. ---

References

1. CWNP, LLC., CWDP-304 Certified Wireless Design Professional Official Study Guide, (Indianapolis: Sybex, 2021). Chapter 6, "WLAN Architecture," in the section on Proprietary Solutions, explains that band steering algorithms must eventually allow a persistent client to connect on 2.4 GHz if it does not move to 5 GHz, to ensure connectivity.

2. Cisco, BandSelect on Wireless LAN Controllers Configuration Example, Document ID: 116333. The document details the algorithm: "If the client continues to send probes on the 2.4 GHz radio, after the suppression timeout, the WLC will allow the client to connect on the 2.4 GHz radio." This explicitly confirms the fallback for persistent clients.

3. Aruba Networks, ArubaOS 8.6.0.0 User Guide, (March 2020). In the section "Configuring Client Match," the principles of band steering are discussed. It notes that the system steers clients but must accommodate varied client behaviors to maintain robust connections, which includes allowing connections on the less-preferred band if steering attempts are unsuccessful. (See section on Band Steering).

Scroll to Top