JN0-637 practice question 11 of 25

You are using ADVPN to deploy a hub-and-spoke VPN to connect your enterprise sites. Which two statements are true in this scenario? (Choose two.)

Full set: 115 questions
Answer options
A: ADVPN creates a full-mesh topology.
B: IBGP routing is required.
C: OSPF routing is required. Correct answer
D: Certificate-based authentication is required. Correct answer
Correct Answer:
C. OSPF routing is required.; D. Certificate-based authentication is required.
Explanation

Auto Discovery VPN (ADVPN) enables the dynamic creation of IPsec tunnels between spoke devices in a hub-and-spoke topology. For this to function scalably and automatically, specific components are required. Certificate-based authentication is a practical requirement. Since spokes can dynamically build tunnels to other spokes they have never communicated with before, a pre-shared key (PSK) mechanism is not scalable. Each spoke would need the PSK of every other spoke. Certificates provide a scalable method for mutual authentication without pre-configuration for every peer. A dynamic routing protocol is necessary to distribute routing information over the VPN. While both OSPF and BGP are supported, BGP requires non-default configuration (e.g., no-next-hop-self on the hub/route-reflector) to preserve the original spoke's next-hop address, which is essential for triggering the dynamic spoke-to-spoke tunnel. OSPF, particularly in NBMA or P2MP mode, handles next-hop preservation more naturally, making it a more straightforward requirement for ADVPN to function correctly.

Why Incorrect

A. ADVPN creates a dynamic, on-demand partial mesh topology. It is an alternative to configuring a static full-mesh, which has significant configuration overhead.
B. IBGP is a supported routing protocol for ADVPN, but it is not a strict requirement as OSPF can also be used.

References

1. Juniper Networks TechLibrary, Understanding Auto Discovery VPNs: "For spoke-to-spoke tunnels, we recommend using certificate-based authentication, as it is more scalable than preshared keys." This supports the practical requirement for certificate-based authentication (Option D).

2. Juniper Networks Day One: Deploying Next Generation Dynamic VPNs, Chapter 3, Page 41: "On the hub device, you must configure BGP to not change the next hop for routes advertised to other iBGP peers... This is accomplished by configuring no-next-hop-self on SRX Series devices... OSPF does not have this requirement." This reference directly supports why OSPF is a more straightforward requirement (Option C) compared to BGP, which needs special configuration to work.

3. Juniper Networks TechLibrary, Understanding Auto Discovery VPNs: "ADVPN replaces the static configurations required for a full-mesh topology with a configuration that allows VPN tunnels to be dynamically created between spokes..." This confirms that ADVPN is an alternative to a full-mesh, making Option A incorrect.

4. Juniper Networks TechLibrary, Understanding Auto Discovery VPNs: "ADVPN uses Next Hop Resolution Protocol (NHRP) and a dynamic routing protocol (BGP or OSPF) to dynamically build spoke-to-spoke VPN tunnels." This shows that IBGP is an option, not a requirement, making Option B incorrect.

Scroll to Top