JN0-637 practice question 5 of 25
You have deployed a new site as shown in the exhibit. Hosts in the 10.10.10.0/24 network must access the DB1 server. The DB1 server must also have internet access the DB1 server encrypted. Which two configuration statements will be required as part of the configuration on SRX1 to satisfy this requirement? (Choose two)
Full set: 115 questionsThe primary requirement is to encrypt the Layer 2 link between the SRX1 device and the access switch. The standard protocol for this is Media Access Control Security (MACsec). Configuring MACsec on a Junos device requires two fundamental steps:
1. Defining a connectivity-association which acts as a template for the security parameters. This includes setting the security-mode, such as static-cak for pre-shared keys.
2. Applying this connectivity-association to the physical interface (ge-0/0/1) that requires encryption. These two commands together enable MACsec on the specified link, fulfilling the encryption requirement without altering the SRX device's ability to perform Layer 3 routing for internet access.
B. This command places the entire SRX device into transparent bridge mode, which would prevent it from performing the Layer 3 routing necessary to provide internet access to the DB1 server.
C. A secure-wire configuration creates a Layer 2 passthrough between two interfaces, bypassing Layer 3 processing. This would also prevent the SRX from routing traffic to the internet.
1. Juniper Networks TechLibrary, Security Configuration Guide, "Configuring Media Access Control Security (MACsec)": This document outlines the exact steps for MACsec configuration. It shows the creation of a connectivity association and its application to an interface. The example configuration includes set security macsec connectivity-association security-mode static-cak and set security macsec interfaces connectivity-association .
2. Juniper Networks TechLibrary, Security Configuration Guide, "Understanding Media Access Control Security (MACsec)": This guide explains that MACsec operates at the data link layer (Layer 2) to provide secure communication on Ethernet links. It details the components, including the Connectivity Association (CA), which is configured under the [edit security macsec] hierarchy.
3. Juniper Networks TechLibrary, Layer 2 Bridging and Switching for Security Devices, "Understanding Transparent Bridge Mode": This document clarifies that in transparent bridge mode, the SRX device functions as a Layer 2 bridge and does not perform Layer 3 routing, which contradicts the requirement for the DB1 server to have internet access.
Keep practicing
Take the free JN0-637 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other JN0-637 practice questions
- Question 3You want to enable transparent mode on your SRX series device. In this scenario, which th…
- Question 6You configure two Ethernet interfaces on your SRX Series device as Layer 2 interfaces and…
- Question 8You have deployed an SRX Series device at your network edge to secure Internet-bound sess…
- Question 9You have deployed automated threat mitigation using Security Director with Policy Enforce…
- Question 10You want to bypass IDP for traffic destined to social media sites using APBR, but it is n…
- Question 11You are using ADVPN to deploy a hub-and-spoke VPN to connect your enterprise sites. Which…
