LEED-AP-BDC practice question 17 of 35
Which individual occupant lighting control meets the requirements of Indoor Environmental Quality Credit, Interior Lighting?
Full set: 305 questionsThe Indoor Environmental Quality (EQ) Credit for Interior Lighting requires individual lighting controls for at least 90% of individual occupant spaces. The controls must provide at least three lighting levels or scenes: on, off, and a midlevel. While the LEED reference guide does not specify an exact percentage for the "midlevel," the term itself implies a setting approximately in the middle of the available range. A 50% level is the most direct and common interpretation of "midlevel," providing a distinct intermediate step between fully on and off. This enhances occupant comfort and control over their personal environment.
A. Two levels (on, off) do not meet the minimum requirement of three distinct lighting levels for individual control.
B. While a 25% level provides a third setting, it is a low-level setting, not a "midlevel" as specified by the credit language.
D. While a 75% level provides a third setting, it is a high-level setting, not a "midlevel" as specified by the credit language.
1. U.S. Green Building Council. (2017). LEED v4 for Building Design and Construction. Washington, DC: U.S. Green Building Council. EQ Credit Interior Lighting, Option 2. Lighting Control, states, "Provide lighting controls that have at least three lighting levels or scenes (on, off, midlevel)" (p. 689).
2. DiLaura, D. L., Houser, K. W., Mistrick, R. G., & Steffy, G. R. (Eds.). (2011). The Lighting Handbook: Reference and Application (10th ed.). Illuminating Engineering Society. Chapter 27, Lighting Controls, discusses multilevel switching as a common strategy, with a 50% step being a typical implementation for a three-level control.
Keep practicing
Take the free LEED-AP-BDC practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other LEED-AP-BDC practice questions
- Question 1When required to measure residential and non-residential densities, Location and Transpor…
- Question 2A design team is working on a hospital project. In order to meet the Energy and Atmospher…
- Question 3For Indoor Environmental Quality Credit, Construction Indoor Air Quality Management Plan,…
- Question 4What LEED Building Design and Construction rating system mandates a preliminary LEED meet…
- Question 5Which of the following strategies would be considered an acceptable minor improvement wit…
- Question 6Which of the following sinks is classified as a private lavatory faucet under Water Effic…
