NS0-184 practice question 7 of 15
You are using Broadcom BES-53248 switches for a cluster interconnect in a base configuration. In this scenario, what is the minimum number of ISLs supported between the switches?
Full set: 60 questionsFor a high-availability cluster interconnect using two Broadcom BES-53248 switches, a minimum of two Inter-Switch Links (ISLs) are required. This configuration ensures redundancy, so if one ISL fails, the cluster interconnect traffic can continue to flow over the remaining link without interruption. A single ISL would represent a single point of failure for inter-switch communication, which is not a supported configuration for a production cluster interconnect.
A. 1: A single ISL is not supported as it creates a single point of failure, violating the high-availability requirement for the cluster interconnect.
C. 3: While using three ISLs is possible for increased bandwidth, it is not the minimum supported number for a base configuration.
D. 4: Four ISLs provide even more bandwidth and redundancy but exceed the minimum requirement for a base configuration.
1. NetApp. (2022). Cluster Interconnect and Cluster Network Switch Installation and Configuration Guide for Broadcom-supported BES-53248 switches. (Document 215-14201A0). Page 13, "Cabling the ISLs". The guide states, "You must use a minimum of two ISLs between the switches."
2. NetApp. (2020). AFF and FAS Platform Cabling Overview and References. (TR-4683). Section 3, "Cluster interconnect cabling". This document reinforces the need for redundant connections for all critical paths, including ISLs.
Keep practicing
Take the free NS0-184 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other NS0-184 practice questions
- Question 2Which command would be used to measure the throughput and latency of traffic between node…
- Question 3On which type of network interfaces are the cluster interconnect LIFs created?
- Question 4After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensur…
- Question 5You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring i…
- Question 8You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You ar…
- Question 9You have completed a base installation and system registration of an AFF A250 system, but…
