NS0-184 practice question 8 of 15

You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes. In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)

Full set: 60 questions
Answer options
A: port sets Correct answer
B: switch zoning
C: reporting nodes Correct answer
D: failover groups
Correct Answer:
A. port sets; C. reporting nodes
Explanation

To allow non-optimized data paths, you must ensure the initiator group (igroup) is aware of the LIFs on the new AFF A250 nodes. The reporting-nodes setting on an igroup explicitly controls which nodes' LIFs are reported to the host as available paths for a LUN, including non-optimized paths. Port sets can also be used to control access by binding an igroup to a specific set of LIFs. If a port set is used, it must be updated to include the new LIFs on the AFF A250 nodes to allow access, including non-optimized access.

Why Incorrect

B. switch zoning: This is a fabric-level configuration, not an ONTAP setting. While necessary for connectivity, it does not control ONTAP's path reporting for ALUA.
D. failover groups: These define which ports a LIF can fail over to. They do not control the visibility of primary, non-failed paths to the host.

References

1. NetApp, Inc. (2022). ONTAP 9 SAN administration guide. Section: "Controlling LUN access with initiator groups," Subsection: "How selective LUN map reporting nodes work."

2. NetApp, Inc. (2022). ONTAP 9 SAN configuration guide for iSCSI. Section: "Configuring iSCSI," Subsection: "Controlling initiator access to LUNs using port sets."

3. NetApp, Inc. (2022). ONTAP 9 Command Reference. igroup modify command documentation, -reporting-nodes parameter description.

Scroll to Top