300-425 practice question 24 of 25
A network engineer is retorting an existing building wired with Category 5e with Cisco Aironet 3800 Series APs and mGig switches. Which cable length allows for 5G operation?
Full set: 286 questionsDomain Wired and Wireless Infrastructure
Cisco Multigigabit Ethernet (mGig) technology, which is based on the IEEE 802.3bz standard, is designed to support higher speeds over existing copper cabling infrastructure. For Category 5e cabling, the standard supports speeds of 2.5 Gbps and 5 Gbps. The maximum channel length for all standard Ethernet-over-twisted-pair technologies, including 5GBASE-T over Category 5e, is 100 meters (328 feet). Any cable run exceeding this distance is out of specification and will not guarantee a stable link at the negotiated speed. Among the choices provided, only 70 meters is within the 100-meter maximum supported length.
B. 120 m: This length exceeds the 100-meter maximum distance specified by the IEEE 802.3bz standard for Ethernet over twisted-pair cabling.
C. 130 m: This length exceeds the 100-meter maximum distance specified by the IEEE 802.3bz standard for Ethernet over twisted-pair cabling.
D. 150 m: This length exceeds the 100-meter maximum distance specified by the IEEE 802.3bz standard for Ethernet over twisted-pair cabling.
1. Cisco White Paper, "Cisco Multigigabit Ethernet Technology": In the "Cabling" section, this document states, "The objective of the NBASE-T Alliance is to leverage the existing billion-plus Cat 5e and Cat 6 outlets to provide 2.5-Gbps and 5-Gbps speeds at up to 100 meters." This confirms the 100-meter distance for 5 Gbps operation.
2. Cisco Aironet 3800 Series Access Points Data Sheet: Under "Product Specifications," the "Interfaces" section lists "100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz." This confirms the AP supports the standard that specifies the 100-meter limit.
3. Cisco Catalyst 9300 Series Switches Data Sheet: In the "Platform Details" section, under the "Cisco Multigigabit Technology" subsection, it is stated: "These models support auto-negotiation of 100-Mbps, 1-Gbps, 2.5-Gbps, and 5-Gbps speeds on Cat 5e cable..." This confirms the compatibility of 5 Gbps speeds with Category 5e cabling, which adheres to the standard 100-meter distance limitation.
Keep practicing
Take the free 300-425 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-425 practice questions
- Question 2A wireless consultant reviewing the installation of an old wireless network. The existing…
- Question 3A company is in the process of relocating to a new force space and ends out that the Inte…
- Question 4An engineer must deploy a wireless network in an open-plan environment that has three SSI…
- Question 5A hospital wireless environment was designed with these characteristics: • RF coverage • …
- Question 6A customer has this wireless design: • two Cisco Catalyst 9800 Series wireless controller…
- Question 7An engineer is implementing a wireless design for a service provider. The design includes…
