400-007 practice question 29 of 35
While designing a switched topology, in which two options is UplinkFast recommended? (Choose two )
Full set: 397 questionsUplinkFast is a Cisco proprietary enhancement for the 802.1D Spanning Tree Protocol (STP) designed to reduce convergence time after a direct link failure. It is recommended for implementation on access layer switches (D) that have redundant uplinks to distribution switches. When the primary uplink fails, UplinkFast immediately transitions a backup port to the forwarding state, bypassing the standard 30-second listening and learning delay. This feature is particularly useful in networks with mixed STP types, for example, where legacy access switches running 802.1D connect to a distribution layer running the faster 802.1w (RSTP) (A). In such a scenario, the access switches cannot benefit from RSTP's rapid convergence, making UplinkFast the recommended mechanism to provide sub-second failover for the 802.1D portion of the network.
B. on distribution layer switches: UplinkFast is not recommended on distribution switches as it aggressively increases the switch's bridge priority and port costs, which could cause it to undesirably become the root bridge.
C. when hello timers are changed to more aggressive values: Modifying STP timers is an independent tuning method. UplinkFast is a specific feature for uplink failover and its use is not contingent on hello timer values.
E. on the core switches: Similar to distribution switches, enabling UplinkFast on core switches is strongly discouraged because it can destabilize the STP topology by unintentionally altering the root bridge placement.
1. Cisco Systems
"Campus Network for High Availability Design Guide
" Document ID: 105582
Section: Access Layer.
"If the access layer switches are running the 802.1D STP
then UplinkFast and BackboneFast should be enabled to speed up the 802.1D convergence time." This directly supports enabling the feature on access layer switches (Option D) and provides the context of using it with 802.1D
which is common in mixed environments (Option A).
2. Cisco Systems
"Catalyst 4500 Series Switch Cisco IOS Configuration Guide
12.2(25)EW
" Chapter: Configuring STP
Section: Understanding UplinkFast.
"UplinkFast is most useful in wiring-closet switches at the access layer of the network." This confirms the primary location for UplinkFast is the access layer (Option D).
"Do not enable UplinkFast on a switch that is likely to become the root switch
and do not enable UplinkFast on backbone or distribution switches." This explicitly refutes the use of UplinkFast on distribution or core switches (Options B and E).
Keep practicing
Take the free 400-007 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 400-007 practice questions
- Question 1An engineer must design a network for a company that uses OSPF LFA to reduce loops. Which…
- Question 2Your company wants to deploy a new data center infrastructure Based on the requirements y…
- Question 3You have been tasked with designing a data center interconnect as part of business contin…
- Question 4A service provider hires you to design its new managed CE offering to meet these requirem…
- Question 5Which three Cisco products are used in conjunction with Red Hat to provide an NFVi soluti…
- Question 6You were tasked to enhance the security of a network with these characteristics: • A pool…
