400-007 practice question 3 of 35
You have been tasked with designing a data center interconnect as part of business continuity You want to use FCoE over this DCI to support synchronous replication. Which two technologies allow for FCoE via lossless Ethernet or data center bridging? (Choose two.)
Full set: 397 questionsFibre Channel over Ethernet (FCoE) encapsulates native Fibre Channel frames into Ethernet frames. A fundamental requirement of Fibre Channel is a lossless transport medium. To achieve this over Ethernet, the Data Center Bridging (DCB) suite of protocols is used, particularly Priority-based Flow Control (PFC, IEEE 802.1Qbb). For a Data Center Interconnect (DCI) to support FCoE, the underlying transport technology must be able to extend this lossless Ethernet domain between sites. DWDM and SONET/SDH are Layer 1 technologies that provide transparent, point-to-point circuits. They transport the entire Ethernet data stream, including the critical DCB control frames (like PFC pause frames), without interpretation, thereby preserving the end-to-end lossless characteristic required for synchronous replication with FCoE.
B. EoMPLS: Standard Ethernet over MPLS services are not inherently lossless and do not typically propagate the specific DCB control frames required to prevent packet loss.
D. Multichassis EtherChannel over Pseudowire: This relies on a pseudowire, which commonly runs over an MPLS core, and thus inherits the same limitations as EoMPLS for lossless transport.
E. VPLS: As another MPLS-based Layer 2 VPN technology, VPLS does not natively provide the end-to-end lossless guarantees or DCB transparency needed for FCoE. ---
1. Cisco Systems
"Fibre Channel over Ethernet (FCoE) Design Guide
" (2009).
Reference: Chapter "FCoE for Data Center Interconnect
" Section "DCI Transport Technologies."
Quote/Paraphrase: This guide explicitly states
"FCoE can be extended between data centers using a variety of technologies
including dark fiber
dense wavelength-division multiplexing (DWDM)
and SONET." It further explains that MPLS-based services (like VPLS and EoMPLS) are "not generally recommended for carrying FCoE traffic" because they do not provide the required lossless transport characteristics.
2. Cisco Systems
"Cisco Nexus 7000 Series NX-OS FCoE Configuration Guide
Release 5.x
" (2012).
Reference: Chapter "Understanding FCoE
" Section "Lossless Ethernet."
Quote/Paraphrase: This document details that FCoE depends on a lossless Ethernet fabric
which is achieved through DCB extensions. It specifies that "The priority flow control (PFC) feature (IEEE 802.1Qbb) is the mechanism for providing lossless service." This establishes the foundational requirement that the DCI technology must support or be transparent to PFC.
3. Cisco Systems
"Data Center Interconnect: Layer 2 Extension Design Guide
" (2013).
Reference: Section "DCI Transport Options
" subsection "Dark Fiber/DWDM/SONET."
Quote/Paraphrase: This guide describes how Layer 1 DCI options like DWDM and SONET provide transparent
low-latency paths. It notes their suitability for protocols with strict requirements
stating they "can transport any Layer 2 protocol
including Data Center Bridging (DCB) extensions required for Fibre Channel over Ethernet (FCoE)."
Keep practicing
Take the free 400-007 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 400-007 practice questions
- Question 1An engineer must design a network for a company that uses OSPF LFA to reduce loops. Which…
- Question 2Your company wants to deploy a new data center infrastructure Based on the requirements y…
- Question 4A service provider hires you to design its new managed CE offering to meet these requirem…
- Question 5Which three Cisco products are used in conjunction with Red Hat to provide an NFVi soluti…
- Question 6You were tasked to enhance the security of a network with these characteristics: • A pool…
- Question 7The network designer needs to use GLOP IP addresses in order to make them unique within t…
