CWDP-305 practice question 14 of 35

A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The traveler connects to the hotel's SSID and notices an AP in the hotel room. However, the laptop reports a very low RSSI when connected. The traveler does not have the same problem when connecting in the lobby. What would be the most likely cause of the low RSSI in the hotel room? Response:

Full set: 341 questions

Domain WLAN Design Troubleshooting

Answer options
A: The AP in the room is transmitting on channel 13 and the traveler associated to a non-channel 13 AP located elsewhere. Correct answer
B: The AP in the room is using Bluetooth instead of Wi-Fi.
C: The AP in the room is using ZigBee instead of Wi-Fi.
D: The switchport that the AP is connected to is only capable of transmitting at 10 Mbps.
Correct Answer:
A. The AP in the room is transmitting on channel 13 and the traveler associated to a non-channel 13 AP located elsewhere.
Explanation

The most likely cause is a regulatory domain mismatch. Wi-Fi devices sold in North America are configured for the FCC regulatory domain, which only permits the use of channels 1-11 in the 2.4 GHz band. In Europe, the ETSI regulatory domain allows channels 1-13. The AP in the hotel room is likely configured to use channel 13. The traveler's laptop, being from North America, cannot see or associate with this channel. Consequently, the laptop connects to a more distant AP (e.g., in a hallway or the lobby) that is operating on a channel it supports (1-11), resulting in a very low Received Signal Strength Indicator (RSSI).

Why Incorrect

B. An Access Point (AP) is an 802.11 Wi-Fi device. While it may have an integrated Bluetooth radio, its primary function is not to provide connectivity via Bluetooth instead of Wi-Fi.
C. ZigBee is a low-power, low-data-rate protocol for IoT devices and is not used for general-purpose network access provided by a hotel AP.
D. The speed of the wired switchport (e.g., 10 Mbps) affects data throughput, not the radio frequency (RF) signal strength (RSSI) received by the client device.

References

1. CWNP, LLC., CWNA Certified Wireless Network Administrator Study Guide, Fifth Edition (CWNA-108). Wiley, 2021. Chapter 3, "Radio Frequency Technologies," under the section "2.4 GHz Channels," states: "The FCC (United States) allows for the use of channels 1–11... ETSI (Europe) allows for the use of channels 1–13." (p. 93). This directly supports the premise that a North American device may not be able to use channel 13 in Europe.

2. IEEE Computer Society., IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications. IEEE Std 802.11-2020 (Revision of IEEE Std 802.11-2016), 2020. Annex E, "Regulatory information," details the channel plans for various regulatory domains worldwide, confirming the channel differences between regions like North America and Europe.

3. Cisco Systems, Inc., Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Amsterdam 17.3.x. "Configuring Channels and Transmit Power" section. The documentation explains that the configured country code determines the available channels, stating, "For example, the United States allows you to use channels 1 to 11 in the 2.4-GHz band." This illustrates how device configuration based on region restricts channel use.

Scroll to Top