300-425 practice question 11 of 25
A 60,000-square foot outdoor area must be surveyed. The survey must be completed in the least amount of time. Which tool or equipment is used when performing the site survey?
Full set: 286 questionsDomain Site Survey
For surveying a large outdoor area efficiently, a site survey tool integrated with a GPS module is the standard and most effective method. The GPS automatically tracks the surveyor's position and plots the collected RF data (such as RSSI and SNR) onto the site map in real-time. This continuous data logging, often done while walking or driving a path, is significantly faster and more accurate than the manual point-and-click method typically used for indoor surveys. This directly addresses the requirement to complete the survey of a 60,000-square-foot area in the least amount of time.
A. additional access points that use sniffer mode: Sniffer mode on an access point is used for packet capture and analysis, primarily for deep troubleshooting or security monitoring, not for conducting a coverage and performance site survey.
B. site survey tool that has modules in sniffer mode: While a survey tool uses a Wi-Fi adapter (which can be in a sniffer/monitor mode) to collect RF data, this feature alone does not solve the core challenge of efficiently mapping location data in a large outdoor space.
C. additional access points that use GPS mode: An access point's internal GPS is for its own location awareness on a management platform (like Cisco DNA Center or Prime Infrastructure). It does not assist the separate site survey tool in mapping the surveyor's path.
1. Cisco
"Outdoor Wireless Site Survey Guidelines
" Document ID: 116838
Section: "Tools for the Survey." This document states
"For large outdoor surveys
it is highly recommended to use a GPS device that is compatible with your site survey software. This will allow you to continuously survey while walking or driving
and the software will automatically plot the data points on the map."
2. Cisco
"Enterprise Mobility 8.5 Design Guide
" Chapter: "Wireless LAN Design
" Section: "Outdoor Wireless Design." This guide discusses the unique requirements for outdoor deployments
including the survey process. It notes that for large areas
"GPS can be used with site survey software to provide accurate location of the readings."
3. Cisco
"Cisco Aironet 1550 Series Outdoor Access Point Deployment Guide
" Section: "Site Survey." In the context of outdoor deployments
this guide emphasizes the importance of a proper survey and mentions tools. It states
"For large outdoor areas
a GPS receiver integrated with the survey software is recommended to automate the collection of data points and ensure accuracy."
Keep practicing
Take the free 300-425 practice test
Ten exam-style questions with answers and explanations, plus the exam facts and study guides.
More questions
Other 300-425 practice questions
- Question 2A wireless consultant reviewing the installation of an old wireless network. The existing…
- Question 3A company is in the process of relocating to a new force space and ends out that the Inte…
- Question 4An engineer must deploy a wireless network in an open-plan environment that has three SSI…
- Question 5A hospital wireless environment was designed with these characteristics: • RF coverage • …
- Question 6A customer has this wireless design: • two Cisco Catalyst 9800 Series wireless controller…
- Question 7An engineer is implementing a wireless design for a service provider. The design includes…
