300-425 practice question 13 of 25

An engineer is designing a network deployment for a technology company. The company has four buildings with access points that must provide seamless wireless coverage and client roaming. The customer data center must have two WLCs and the core switches for the network. Which type of wireless architecture must be used?

Full set: 286 questions

Domain Mobility

Answer options
A: cloud
B: centralized Correct answer
C: autonomous
D: distributed
Correct Answer:
B. centralized
Explanation

The scenario describes a classic centralized wireless architecture. In this model, lightweight access points (APs) are deployed across multiple buildings, and all management, control, and typically data traffic are tunneled back to one or more Wireless LAN Controllers (WLCs) located in a central data center. This design provides a single point of management for the entire wireless network, simplifies policy enforcement, and facilitates seamless client roaming (Layer 2 and Layer 3) between APs across the campus, which directly meets the stated requirements. The presence of two WLCs in the data center is a common high-availability design within this architecture.

Why Incorrect

A. cloud: A cloud architecture involves management from a vendor-hosted cloud platform (e.g., Cisco Meraki). The question specifies the WLCs are in the customer's data center, not a public cloud.
C. autonomous: In an autonomous architecture, each AP is configured and managed independently. This model lacks a central controller, making seamless roaming and centralized management across four buildings difficult to achieve.
D. distributed: While features like FlexConnect distribute the data plane, the fundamental control and management plane remains centralized at the WLC. The core architecture described is centralized, not a distributed control model like Embedded Wireless Controller (EWC).

References

1. Cisco Press, CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide. Chapter 2, "Cisco Wireless Architectures," Section: "Centralized WLC Deployment." This section explicitly states, "In a centralized deployment, one or more WLCs are located at a central site, such as a corporate headquarters or a data center... This is the traditional deployment model for a wireless network." It further details how this architecture facilitates seamless roaming.

2. Cisco, Enterprise Mobility 8.5 Design Guide. Chapter: "Centralized Wireless LAN," Section: "Overview." The guide states, "In the centralized WLC deployment, the WLCs are located in a centralized location, for example, in a data center... The APs at the remote locations communicate with the centralized WLC over a WAN link." This perfectly matches the question's scenario of APs in buildings connecting to WLCs in a data center.

3. Cisco, Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Bengaluru 17.6.x. Chapter: "Centralized Wireless," Section: "Information About Centralized Wireless." This document describes the centralized deployment model where APs connect to the controller over a Layer 3 network, and the controller manages the APs and provides connectivity to wireless clients. This aligns with the requirement for coverage across four separate buildings connected to a core data center.

Scroll to Top