300-425 practice question 18 of 25

An engineer is setting up the WLC to support a high-density design for a lecture hall. The engineer must modify the existing high-density RF protocol to obtain a smaller cell size. Also, the clients must connect to the nearest AP using the highest possible data rates. Which setting allows this design?

Full set: 286 questions

Domain Wired and Wireless Infrastructure

Answer options
A: AP load balance
B: client distribution
C: power threshold
D: RX-SOP threshold Correct answer
Correct Answer:
D. RX-SOP threshold
Explanation

The Receiver Start of Packet (RX-SOP) detection threshold defines the minimum RSSI level required for an AP's radio to process an incoming Wi-Fi frame. In a high-density design, increasing the RX-SOP threshold makes the AP less sensitive, effectively ignoring weaker signals from distant clients. This technique shrinks the effective cell size by reducing the area in which the AP will respond to client probes. As a result, clients are compelled to associate with a closer AP that provides a stronger signal. A stronger signal leads to a better Signal-to-Noise Ratio (SNR), which allows the client to use higher data rates, fulfilling all the design requirements.

Why Incorrect

A. AP load balance: This feature distributes clients based on the number of associations per AP, not on RF signal strength or proximity, and does not directly control cell size.
B. client distribution: This is a general term that includes features like band steering and load balancing, which do not directly address cell size based on receive sensitivity.
C. power threshold: This relates to Transmit Power Control (TPC), which reduces AP transmit power. While this helps shrink cells, RX-SOP is more effective at forcing clients to the nearest AP by controlling what the AP hears.

References

1. Cisco

"High Density Wi-Fi Design and Deployment Guide" (2020).

Section: RX-SOP

Page 16: "RX-SOP is a feature that allows the fine-tuning of the cell size by changing the receive sensitivity of the AP. [...] By making the AP deaf to weak signals

we can effectively shrink the cell size and allow the client to connect to a closer AP. A closer AP means a stronger signal

better modulation and coding scheme (MCS) rates

and a better overall user experience."

2. Cisco

"Radio Resource Management under Unified Wireless Networks" White Paper.

Section: Receiver Start of Packet (RX-SOP)

Paragraph 1: "In high density deployments where there are a large number of APs and clients

it is desirable to shrink the cell size of the APs. [...] RX-SOP allows the user to configure the threshold (in dBm) at which the radio will receive a packet. Any packet that is received with an RSSI lower than the configured RX-SOP threshold will be discarded by the radio."

3. Cisco

"Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide

Cisco IOS XE Amsterdam 17.3.x".

Chapter: Configuring Radio Resource Management

Section: Configuring RX-SOP Threshold: "In a high-density environment

you can configure the RX-SOP threshold to shrink the cell size of the APs. This ensures that the clients connect to the nearest AP and have a better signal

which results in a higher throughput."

Scroll to Top