400-007 practice question 14 of 35

Which two factors must be considered for high availability in campus LAN designs to mitigate concerns about unavailability of network resources? (Choose two.)

Full set: 397 questions
Answer options
A: device resiliency Correct answer
B: device type
C: network type
D: network resiliency Correct answer
E: network size
Correct Answer:
A. device resiliency; D. network resiliency
Explanation

High availability in a campus LAN design is achieved by eliminating single points of failure and ensuring rapid recovery from faults. This is accomplished through two primary strategies:
1. Device Resiliency (A): This focuses on the fault tolerance of individual network devices. It involves deploying hardware with redundant internal components, such as dual supervisor engines, multiple power supplies, and redundant fan trays. Software features like Nonstop Forwarding (NSF) with Stateful Switchover (SSO) also contribute by allowing a standby supervisor to take over seamlessly if the primary fails.
2. Network Resiliency (D): This addresses the fault tolerance of the overall network topology. It involves creating redundant physical paths between devices and deploying protocols that can detect failures and reconverge traffic quickly. Examples include using EtherChannel for link redundancy and First Hop Redundancy Protocols (FHRPs) like HSRP or VRRP for default gateway redundancy.

Why Incorrect

B. device type: This is too general. The critical factor is the resiliency features available on a device, not simply its type or model.
C. network type: This is irrelevant. The question already specifies the context is a campus LAN. Other network types (WAN, MAN) are not under consideration.
E. network size: Network size is a scaling consideration that influences the complexity of the HA design, but it is not a foundational factor for achieving high availability itself.

References

1. Cisco

"Campus LAN and Wireless LAN Design Guide" (OL-27102-01)

December 19

2012.

Section: "High Availability

" Page 2-23: This section explicitly details the core components of a high-availability design. It states

"High availability is a composite of two main components: network resiliency and device resiliency." It then describes device resiliency in terms of redundant hardware and software features (SSO/NSF) and network resiliency in terms of redundant links and fast convergence.

2. Cisco

"Enterprise Campus 3.0 Architecture: High Availability Design Guide

" October 2006.

Section: "Introduction

" Page 4: "High availability is achieved in the campus network through a combination of device-level resiliency

link-level resiliency

and network-level resiliency." This document further reinforces that device and network resiliency are the foundational pillars of a high-availability strategy.

3. Cisco

"Cisco SD-Access Design Guide

" August 2023.

Section: "SD-Access Fabric Resiliency

" Page 11: While focused on a specific architecture

the underlying principles remain. The guide discusses resiliency at multiple levels: "Device-level redundancy is provided by redundant power supplies

supervisors

and StackWise Virtual. Network-level redundancy is provided by the IP-based underlay and the LISP-based control plane." This confirms the modern application of these two core factors.

Scroll to Top